Scheduled presentations:

• Stress History and Effective Shear Strength Parameters Evaluation of a Dilative Stiff Clay
  G. Pinto*, M. Araujo, A. Faria, J. Carneiro, M. Junior
• Engineering surveys for construction based on the concept of sustainability resource to external influences and nature-based solutions
  V. IEGUPOV*, G. STRIZHELCHIK, R. GOODARY
• Upgrading a resonant column apparatus to reliably measure specimen void ratio
  C. Vulpe*
• A Data Driven CPTu-PINNs Method to Predict Soil Settlement
  H. Li, Z. Ouyang*
• Characteristics of the Electroresistivity of a compacted Iron Ore Tailing
  F. Marinho, M. Hora, B. Dos Santos, B. Delgado, J. Da Silva*
• Effects of storage time on sample quality in Ballina clay
  K. Ouyang, J. Pineda*
• The Use Of Large-Scale 3D Numerical Modeling to Identify Areas of Increased Seismic Risk in Polish Underground Copper Mines.
  K. Fuławka*, R. Kołodziej, L. Stolecki, I. Jaśkiewicz-Proć
• Estimation of Pore Pressure for Unsaturated-Saturated Bentonite Sand Mixture
  T. NISHIMURA*
• Characterization of the Consolidation Coefficient Behavior from Piezocone and Piezoball Tests in a Brazilian Soft Soil
  J. Sosnoski*, A. Meier, G. Dienstmann, H. Nierwinski, E. Odebrecht, F. Mantaras
• Effect of Precast Pile Driving on Liquefaction Potential Mitigation of Sandy Silts Based on CPTu
  K. Fakharian*, M. Hashemi, F. Kaviani-Hamedani, A. Osouli, H. Vaezian, M. Bahrami, T. Bahrami, I. H. Attar
• Evaluation of the Liquefaction Resistance of Sandy Soil for Shaking Table Tests
  F. Castelli, S. Grasso, V. Lentini, M. Sammito*
• Development of a framework for automatic quantification of uncertainty in seismic cone penetration testing
  T. Zheng*, R. Buckley, E. Febrianto
• Seismic P-, SH- and SV-Wave Cross-Hole Testing Using Direct-Push Technology for the Determination of Geotechnical Parameters
  T. Fechner*, U. Koedel, S. Mackens-Siemes
• Uniaxial Compressive Strength versus Shear Seismic Wave Velocity
  M. Cabrera*, M. Combarros
• Advances in the Characterisation of Sites Contaminated with Petroleum Hydrocarbons: Insights from a Collaborative Effort
  J. García-Rincón*, E. Gatsios, R. Lenhard, E. Atekwana, R. Naidu
• Direct-Push Profiling Technologies for Sustainable Investigation of Contaminated Sites
  J. García-Rincón*
• Engineering characterization of lacustrine soil deposits at the inner bay of Puno around Titicaca Lake
  S. Laura-Huanca*
• Influence of hydrogeological conditions on estimation of undrained shear strength by CPTu tests: case study in a tropical soil
  I. Rigatto*, L. Ferreira
• Open-source implementation of the new unified CPT-based axial method in sands
  C. Sastre Jurado, B. Stuyts*
• Measurement of soil temperature with depth using multiple sensor arrays
  M. Zizzi*, G. Elia, O. Bottiglieri, F. Cotecchia
• Geological and geotechnical study of a construction site in Porto Romano area-Albania
  A. Malaj*, S. Allkja, J. Belliu, I. Kero
• Collapsible Behaviour of a Compacted Lateritic Sandy Soil
  I. Augusto Silveira*, H. Giacheti, B. Padovezi Rocha, R. Rodrigues
• Influence of the Weathering Degree on the Dispersion Susceptibility of Allophanic Soils
  A. Castañeda Jaimes*, J. Colmenares Montañez, L. Viveros Rosero
• Field Site Characterization of a Coastal Aeolian Sandy Subgrade for a Proposed Tank Farm Site in Peru
  J. Zamora*, M. Pando
• Evolution of fracture permeability in active clayey formations
  A. Seiphoori*, U. Mok, P. Marschall
• Development of a 3D Ground Model for an Offshore Wind Farm with Complex Interlayering of Silty Soils
  X. Peng*, Y. Gao, Y. Du, D. Wang, P. Li, X. Li, Y. Zhang
• In situ and laboratory results of a bentonite-based block/pellet seal during saturation
  A. Mesa-Alcantara*, E. Romero