Seismic liquefaction of loose saturated cohesionless soils is one of the most dangerous and catastrophic phenomena that involves a temporary loss of soil shear strength and stiffness as a consequence of increase pore pressure and reduced effective stress. Therefore, the evaluation of the excess pore pressure induced by shaking is important to predict the liquefaction behaviour of soils at a large scale. In this regard, the study provides the static and dynamic characterisation of a liquefiable sand. For this purpose, a laboratory testing programme, which included the execution of cyclic direct simple shear (CDSS) tests, was performed. The CDSS tests were carried out by means of the CDSS device at the Soil Dynamics and Geotechnical Engineering Laboratory of the University “Kore” of Enna (Italy). The device is designed to allow the soil specimen to be consolidated one-dimensionally and then sheared under constant volume conditions, which replicates the undrained shear condition of the soil specimen. The CDSS tests were conducted to evaluate the liquefaction resistance of the sand under several test conditions, i.e. initial relative density, vertical effective stress or cyclic stress ratios. Results of this study provide useful information for the geotechnical characterisation of the liquefiable sand to be used in shaking table tests at the Laboratory of Earthquake Engineering and Dynamic Analysis (L.E.D.A.) of the University “Kore” of Enna. The laboratory is equipped with a large biaxial laminar shear box for reduced-scale model tests developed to monitor liquefaction under two-dimensional shaking.