Towards the development of a standard for the PS suspension logger
Please login to view abstract download link
The PS logger is a well-established seismic tool for measuring P and S wave velocities in a single borehole, using low frequency indirect excitation originating from a dipole source. Because of its low operating frequency, it is capable of generating a pressure wave in slow, unconsolidated materials such as those found in offshore environments, where S wave velocity is often used to estimate the small strain stiffness, Gmax (of particular interest to offshore construction). Despite its widespread use, there is no current standard for the use of the PS logger, even though other methods operating on similar principles have well-established reference methodologies and guidelines. As such, PS logger methodology is largely dictated by user manuals written by manufacturers, which likely introduces inconsistencies in operation guidelines, and may impede consistency in data obtained by different users. In this paper, the authors conduct a literature review of existing standards for relevant methods including SCPT, pressuremeter, and downhole and crosshole seismic testing, as well as relevant ground investigation standards, identifying the need for standardisation of the PS logging method. Examination of the current state of standardisation concludes that although existing seismic testing standards could be reasonably be expanded to include the PS logging method, the differing constraints and operational requirements are such that the development of a specific PS logger testing standard is recommended. An initial framework is presented for a PS logger standard, identifying the required components, in terms of borehole requirements, testing procedure, data interpretation and best practice.