Historically, the analyses of tailings storage facilities (TSFs) have primarily focused on understanding the characteristics of tailings, while often overlooking a comprehensive evaluation of the foundation, as seen at Mount Polley in 2014. The Global Industry Standard on Tailings Management (GISTM) Requirement 5.4 stresses the importance of comprehensively addressing all potential failure modes. Numerous platinum TSFs in Southern Africa are underlain by residual clay, specifically a residual mafic rock from the Bushveld Complex. Similar soils, known as "tropical black clay soils," in other regions display substantial shear strength reduction at high stresses. Surprisingly, there's limited public information on testing and modelling the behaviour of this clay foundation. This paper presents a case study that employs a novel approach to assess the impact of loading from tailings deposition on the underlying clay foundation of an upstream TSF. The analysis investigates how shear behaviour and consolidation characteristics of the clay foundation change with varying TSF heights and construction rates. The approach includes quantifying excess pore water pressures and their influence on the clay foundation's effective stress. The analyses primarily employ traditional limit equilibrium methods to assess TSF stability and foundation behaviour, with the potential to expand to numerical modelling. The study concludes that excess pore water pressures will significantly affect the Factor of Safety (FoS) of a TSF, particularly with adverse consolidation characteristics and increasing TSF height. This is primarily due to the low permeability and changing consolidation coefficient (cv) of the clay layer as the surcharge load increases. Furthermore, the research reveals that, depending on the rate of rise, tailings deposition may induce excess pore water pressures, potentially reducing the FoS. The ability to quantify excess pore water pressures using this novel approach enables a more accurate estimation of the FoS for facilities underlain by low-permeability materials, either residual or transported.